1.75mm PLA filament on a 1kg spool - Black Diameter tolerance ±0.03mm via CCD measurement Bubble-Free extrusion and Neat Winding for tangle-free printing Nozzle temperature 190-240°C, print speeds up to 250mm/s Compatible with Bambu Lab, Creality, Flashforge and most FFF printers Plant-based, biodegradable material from renewable resources RoHS, REACH, and SDS certified Batch-tested on a 48-hour continuous print for quality assurance Dimensions: Spool diameter: 200mm, hub hole: 52mm, spool width: 76mm Flashforge PLA Basic 1.75mm PLA Filament for 3D Printers A reliable PLA filament for everyday 3D printing: Flashforge PLA Basic is a 1.75mm diameter filament wound onto a 1kg spool, produced from renewable plant-based materials including cornstarch. It is RoHS, REACH, and SDS certified, making it one of the more responsibly sourced options in the standard filament category. Low odour and minimal warping make it a practical choice for beginners and experienced users alike. Consistent diameter for clean, reliable extrusion: Flashforge manufactures PLA Basic in a dust-free workshop, using CCD (charge-coupled device) diameter measurement and self-adaptive control systems to keep 99% of the filament within a 1.75mm tolerance of ±0.03mm. The result is Bubble-Free extrusion, reduced nozzle clogging, and Neat Winding on the spool to prevent tangles during printing. Tested under real printing conditions: Every batch of Flashforge PLA Basic is tested by printing a large 3D model that requires a minimum of 48 hours of continuous printing at the thinnest layer height. This ensures the filament feeds consistently from start to finish, without mid-print failures that can waste both time and material. Works with most FFF 3D printers on the market: PLA Basic is compatible with all FFF (Fused Filament Fabrication) printers that accept 1.75mm filament, including models from Bambu Lab (A1, P1, and X1 series) and Creality (K1C and Ender series), as well as Flashforge's own machines. The recommended nozzle temperature range of 190-240°C covers a wide variety of printer profiles, with higher temperatures recommended at faster print speeds. Shop the full Printers range from Heavins.ie, with delivery available across Ireland. Key Features Filament Diameter - 1.75mm ±0.03mm, maintained via CCD measurement systems. Bubble-Free Extrusion - manufacturing controls reduce air pockets for consistent flow through the nozzle. Neat Winding - spool is wound uniformly to prevent tangling and feeding issues during long prints. Low Warping - PLA material properties keep parts flat on the build plate without an enclosure. Low Odour - suitable for use in home, school, and office environments. Plant-Based Material - produced from renewable resources including cornstarch; biodegradable. Wide Compatibility - works with Bambu Lab, Creality, Flashforge, and other FFF printers using 1.75mm filament. 48-Hour Print Test - every batch is tested on a large model printed at minimum layer height for quality assurance. Certifications - RoHS, REACH, and SDS certified. Specifications Filament material: PLA (Polylactic Acid) Filament diameter: 1.75mm ±0.03mm Net weight: 1kg (2.2 lb) Colour: Black Recommended nozzle temperature: 190-240°C Recommended build plate temperature: 25-60°C Recommended nozzle diameter: 0.4mm (0.6mm also compatible) Layer height: 0.12-0.3mm Printing speed: 40-250mm/s Cooling fan: 50-100% Retraction length: 1-2mm Retraction speed: 30-50mm/s Heat deflection temperature (HDT @ 0.455 MPa): 53°C (ISO 75) Tensile strength (X-Y): 45-49 MPa (ISO 527) Flexural strength (X-Y): 69-75 MPa (ISO 178) Density: 1.25-1.26 g/cm³ (ISO 1183) Water absorption (23°C/24h): less than 0.3% (ISO 62) Drying conditions: 55°C for 8 hours (convection oven) Storage: room temperature to 40°C, 20% RH or below, sealed with desiccant Spool diameter: 200mm Spool hub hole: 52mm Spool width: 76mm Compatible support materials: self-supporting, PVA, BVOH Certifications: RoHS, REACH, SDS Warranty: 1 Year What's Included in the Box 1 x Flashforge PLA Basic filament spool, 1.75mm, 1kg - Black