The SCX25A, is a professional studio condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shock-mounted within an intricate machined brass ring, the capsule is completely isolated from the mic body and electronics. By successfully minimizing acoustic reflections and diffractions, the SCX25A delivers a pure, open air sound with exceptional detail and realism.

The SCX25A is consistent when responding to on and off-axis signals. This mic exhibits outstanding phase coherence and minimal proximity effect. With a wide cardioid polar pattern, the SCX25A enables the sound engineer to blend the sound of the instrument or vocal with the sound of the room. The SCX25A large diaphragm microphone will handle SPLs in excess of 135 dB and provides up to 20 dB of ambient noise rejection.

Affectionately referred to as  "The Lollipop," The SCX25A cardioid studio condenser microphone is perfectly suited to capture the sound of acoustic instruments such as pianos, guitars, vibes, woodwinds, brass, percussion toys, drums, orchestra and symphony sections.

Transducer Type Condenser Frequency Response 20 Hz – 20 kHz Polar Pattern Cardioid Output Impedance 200 ohms Sensitivity 28 mV / Pa @ 1k Equivalent Noise Level 14 dB (A-weighted) Signal to Noise Ratio 80 dB Maximum SPL ≥135 dB Dynamic Range 121 dB Power Requirements 48-52 V phantom Connector 3-pin XLRm Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector Materials / Finish Machined Brass / Black Finish Weight 244 g / 8.6 oz Length 148 mm / 5.8 in