Optimal solution to install Honeycombs correctly Installation kit for MAF Honeycomb 76mm / 3" - Alu (w/o Honeycomb) Honeycomb weld-on adapter Aluminum for MAF Optimal solution to install Honeycombs correctly Since the introduction of honeycombs, the problem has often been: "How do I install the honeycomb securely and firmly in a pipe?" This solution is ideal for all MAF/LMM engines that want or even need to calm their airflow. To determine the correct air mass/air volume, it is essential to have a smooth and harmonious air flow at the MAF sensor. However, this is often no longer the case, especially with more powerful engines. Either due to modified intakes, pipes, bends, air filter boxes, etc.... Our Honeycomb installation kit is installed in front of the MAF and calms the intake air so that the correct values can be determined by the sensor again. The aluminum ring allows the entire module to be welded to the pipe to the MAF or directly to the MAF housing. In combination with the supplied plastic fixing ring, the honeycomb grid always remains in a fixed position.

For pipes with 76mm / 3.0" diameter Fits directly to the tube in front of the MAF sensor For Honeycombs with approx. 72-74mm outside diameter (our shop item No. 248644) Technical data: Width: 33mm Diameter: See selection menu Material: Aluminum EN AW 6061 Installation instructions: The correct honeycomb itself is simply pressed into the short aluminum tube (or mount) and fixed in place using the plastic ring supplied. Take a look at the pictures for better illustration.