To display OBD 2 values on the CANchecked gauges CANchecked OBD 2 cable set - Version 2.0 OBD 2 cable for the CANchecked MFD28 / MFD32 / MFD32S displays To display OBD 2 values on the CANchecked gauges Finally available, the OBD 2 cable for the CANchecked displays! With it the installation is done in a few minutes and all OBD 2 values can be shown on the display! Also engine error codes can be displayed! Note: To display up to 50 OBD 2.0 values, you have to install the display with the CANchecked OBD 2 cable to the vehicle, then read out the PID/s with the display, then enter the PID/s via the online DBC converter and name them individually and save them on the Micro SD card in an indivuel tri.file. Key Facts: - OBD plug with 2m cable for connection to a MFD28/MFD32/MFD32S - The following pins are led from the OBD plug to the display: Positive supply, ground (Pin 4+5), Can High (Pin 6), Can Low (Pin 14) - The 12V+ cable is led out separately at the connector (approx. 15cm) and must be connected to a free fuse location on the fuse box. If there is no more free space, a large and a mini-adapter are included in the delivery. Supported values: All OBD 2.0 values that the control unit outputs. Only a maximum of 50 values can be fed into the display. Scope of delivery: - 2 m OBD 2 cable with connectors For more information contact us.