Transparent adhesion primer - no stains or visible residue Dries in approx. 10 minutes at 20°C polyolefin-based formula for low surface-energy plastics Compatible with PP, ABS, PUR, powder coatings, and ted surfaces Use before MS polymers, silicones, tapes, ts, or spray coatings CFC-free propellant, heavy-metal free Aerosol can made from recycled materials 10-year shelf life under correct storage conditions Dimensions: 172 x 52 x 52 mm Tec7 PT7 Adhesion Primer for Plastics and Powder Coatings What PT7 Does: Tec7 PT7 is a transparent, polyolefin-based adhesion primer designed to improve bonding on surfaces that resist adhesion in their untreated state. Applied as a thin aerosol layer before using MS polymer adhesives, silicones, tapes, ts, or spray coatings, it gives those products a surface they can grip firmly and durably. Compatible Substrates: PT7 is formulated for use on PP, PP/EPDM, ABS, SAN, PC, PA, PUR-RIM, R-TRU, PPO, PBT, PUR flexible foam, UP-GF plastic, powder-coated surfaces, and ted surfaces. It is not intended for use on bare metals, where it offers no adhesion benefit over standard preparation methods. Fast Drying, No Residue: The primer dries in approximately 10 minutes at 20°C and leaves no visible traces or stains on the substrate. This makes it well suited to visible assemblies where cleanliness of finish matters alongside bond strength. CFC-Free and Heavy-Metal Free: PT7 uses CFC-free propellants and contains no heavy metals. The aerosol can itself is manufactured from recycled materials. Shelf life is 120 months (10 years) when stored at 10°C to 25°C with a maximum relative air humidity of 60%. Shop the full ting & Decorating range from Heavins.ie, with delivery available across Ireland. Key Features Transparent finish - leaves no visible traces or stains on the substrate.polyolefin base - specifically formulated chemistry for bonding to low surface-energy plastics.10-minute dry time - ready to bond or coat at 20°C in approximately 10 minutes.

Broad substrate compatibility - works on PP, PP/EPDM, ABS, SAN, PC, PA, PUR-RIM, R-TRU, PPO, PBT, PUR flexible foam, UP-GF plastic, powder coatings, and ted surfaces.

Dual-use application - suitable as pre-treatment for MS polymers, silicones, tapes, ts, and spray coatings.

CFC-free propellant - aerosol uses no chlorofluorocarbons.

Heavy-metal free - contains no lead, chromates, or other heavy metals.

Recycled aerosol can - manufactured from recycled materials.10-year shelf life - 120-month shelf life under recommended storage conditions. Specifications Brand: Tec7 Model: PT7 Volume: 200 ml Base / Chemistry: polyolefin Colour: Transparent Drying Time: Approx. 10 minutes at 20°C VOC Content: 276.4 g/l Shelf Life: 120 months (10 years) at 10°C-25°C, max. 60% relative humidity Compatible Substrates: PP, PP/EPDM, ABS, SAN, PC, PA, PUR-RIM, R-TRU, PPO, PBT, PUR flexible foam, UP-GF plastic, powder coatings, ted surfaces Not Suitable For: Bare metals Propellant: CFC-free Heavy Metals: Free of heavy metals Hazard Class: GHS02 Flammable, GHS07 Harmful/Irritant, GHS09 Environmental hazard Storage Temperature: 10°C to 25°C, max. 60% relative humidity; do not expose to temperatures exceeding 50°C Dimensions (HxWxD): 172 x 52 x 52 mm Weight: 0.2 kg EAN: 5414195003152 What's Included in the Box 1 x Tec7 PT7 Adhesion Primer aerosol, 200 ml