Robert Sorby 2mm Fluted Parting Chisel - (Handled) - 832H.2 Key Features: This tool has a milled flute running along the bottom edge, creating two sharp spurs at the cutting face. These sever the fibres to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut. This features a radically new and unique cutting profile with a blade profile of only 2mm. The long bevel has a milled flute which is the cutting face. The small bevel his the sharpening face. When parting off, this unique arrangement causes the tip to always cut at a shear cutting angle of 45º, producing a finish without equal from a parting tool, virtually eliminating the need for sanding.

Many turners prefer to turn their tool handles to their own specifications. For those turners we offer here the un-handled versions of Sorby's standard turning tools. These High Speed Steel (HSS) un-handled blades are identical to the ones found on the handled version.

The 3/16" blade listed here will also fit the Sorby Sovereign System Handles. A Collet Adapter may be required if used with the Sovereign System. Check your manual for the size collet required if, any.

Nose details are shown below (2mm parallel grind and 3/16 tapered grind).

Tools with handles are coded with an H.

Product Reference Size (inches) Size (mm) Overall Length Handle Length 832.2 1/16" 2mm 6" Unhandled 832.3/16 3/16" 5mm 6" Unhandled 832H.2 1/16" 2mm 18 1/2" 12" 832H.3/16 3/16" 5mm 18 1/2" 12" The product you are currently viewing is highlighted in red.

Click here to see the full range of options for this product