Trend Contractor Lock Jig Ref: LOCK/JIG This jig uses a set of interchangeable templates and a router to cut the mortise and faceplate recess for popular door locks Key Features For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate Deeper mortises can be achieved with a suitable size of auger bit Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood Steel plates & body An auger bit and drill is required to complete deep mortises The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise Trend Lock Jig is supplied with: 1 x Guide bush 12 X Faceplate templates 5 X Mortise template 6 X Spacer fingers Templates Included: Description Metric Imperial Template Faceplate Dimensions: 22.2 x 156mm 7/8" x 6-1/8" 1 22.5 x 152.5mm 7/8" x 6" 2 25.4 x 121mm 1" x 4-3/4" 3 25.4 x 127.5mm 1" x 5" 4 25.4 x 133.5mm 1" X 5"-1/4" 5 25.4 X 145mm 1" x 5-3/4" 6 25.4 x 153mm 1" x 6" 7 25.4 x 156.5mm 1" x 6-1/8" 8 25.4 x 165.5mm 1" x 6-1/2" 9 25.4 x 177mm 1" x 7" 10 25 x 57.5mm 1" x 2-1/4" 11 UPPER 26 x 56.5mm 1" x 2-1/4" 11 LOWER 25.6 x 162mm 1" x 6-3/8" 12 Mortise Lock Dimensions: 16 x 72mm* 5/8" x 2-7/8" A 16 x 107mm* 5/8 x 4-1/4" B 19 x 78mm* 3/4" x 3" C 19 x 109mm* 3/4" x 4-1/4" D *These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer. Smaller mortise locks can be accommodated depending on position of their fixing screws.

Spare Templates Size Product Reference Size 16mm x 72mm mortise WP-LOCK/T/A Size 16mm x 107mm mortise WP-LOCK/T/B Size 19mm x 78mm mortise WP-LOCK/T/C Size 19mm x 109mm mortise WP-LOCK/T/D Size 22.2mm x 152.5mm faceplate WP-LOCK/T/2 Size 22.2mm x 156mm faceplate WP-LOCK/T/1 Size 25.4mm x 121mm faceplate WP-LOCK/T/3 Size 25.4mm x 128mm faceplate WP-LOCK/T/4 Size 25.4mm x 133.5mm faceplate WP-LOCK/T/5 Size 25.4mm x 145mm faceplate WP-LOCK/T/6 Size 25.4mm x 153mm faceplate WP-LOCK/T/7 Size 25.4mm x 156.5mm faceplate WP-LOCK/T/8 Size 25.4mm x 165.5mm faceplate WP-LOCK/T/9 Size 25.4mm x 177mm faceplate WP-LOCK/T/10 Size 26 x 56.5mm & 25 x 57.5mm faceplate WP-LOCK/T/11 Size 26mm x 162mm faceplate WP-LOCK/T/12 Accessory Templates Size Product Reference