Eaton 103GNC Glasgow Triple Pole Metal Fused Switch Disconnector - 100A\r\n- Eaton 103GNC Glasgow Triple Pole Metal Fused Switch Disconnector - 100A- The operating ON/OFF Handle is retractive sliding back into the enclosure when not in use.- Retractable operating handles which drive over center mechanisms incorporating powerful operating springs.- Units are fitted with HRC fuseinks of maximum rating but will accept fuselinks of a lower rating.- They can also be converted into Switch Isolators by fitting 3 x 100MLK Solid Copper Switch Links. \r\nThe Eaton 103GNC Glasgow Triple Pole Metal Fused Switch Disconnector - 100A is designed for distribution board. This Fuse Switch can be de-rated by fitting with lower amperage HRC Fuses of the TCP range of fuses from SD5 TCP type from TCP10, 16, 20, 25 32, 40, 50, 63 & 80amps. It is fitted with HRC fuse links of maximum rating but will accept fuse links of a lower rating. The Fused Switch Disconnector is suitable for fuse links SB3, SB4, SO and SD5.\r\nFeatures: - Current Rating: 100 Amp.- SPSN and TPSN indicate switched neutral.- Suitable fuse links SB3, SB4, SO and SD5.- Neutral makes first break and last.- Type: Fuse Switch Disconnector.- Number of Poles: Three Pole and Neutral.- Voltage: 415 Volt.- Supplied with: Eaton MEM 100SD5 fuse.- Terminal capacity 50mm2.- Surface mounted in a metal enclosure.- Ingress Protection Rating: IP41.- Brand: Eaton.\r\nDimensions: (H)327 mm x (W)275 mm x (D)180 mm.\r\n