Gloss floor t for tiles, concrete, and bricks Water-based acrylic - low odour, easy to clean up Covers approx. 7m² per 500ml tin Hard-wearing and weather-resistant finish Suits interior and exterior use Micronised red oxide pigment for good opacity Not suitable for glazed or quarry tiles Rustins Quick Dry Step and Tile Gloss Floor t - Tile Red 500ml A tough gloss finish for steps, tiles, and concrete: Rustins Quick Dry Step & Tile Gloss Floor t is a water-based, acrylic gloss formulated for use on tiles, concrete, and bricks in both interior and exterior settings. The Tile Red colourway uses micronised red oxide pigment for good opacity, giving solid, even coverage across high-traffic surfaces. Two coats are usually sufficient, with a light sand between coats if needed. Hard-wearing and weather-resistant: This t is designed to stand up to foot traffic and outdoor exposure, making it well suited to garden steps, pathways, and concrete floors. The gloss finish is durable and weather-resistant, and the water-based formula keeps odour low and clean-up straightforward. Do not apply below 10°C or when rain is imminent. Coverage and application: Each 500ml tin covers approximately 7m², applied with a good-quality brush or roller. The t is not suitable for use on glazed or quarry tiles. For a complete set of drying and recoat times, refer to the Rustins Product Data Sheet available from the manufacturer. Shop the full ting & Decorating range from Heavins.ie, with delivery available across Ireland. Specifications Brand: Rustins Product: Quick Dry Step & Tile Gloss Floor t Colour: Tile Red Finish: Gloss Formula: Water-based acrylic Volume: 500ml Coverage: Approx. 7m² per 500ml tin (14m² per litre) Coats Required: 2 (sand lightly between coats) Suitable Surfaces: Tiles, concrete, bricks Not Suitable For: Glazed or quarry tiles Use: Interior and exterior Minimum Application Temperature: 10°C Pigment: Micronised red oxide