High quality ARP flywheel bolt kit for Audi/Seat/Skoda/VW 16V / 1.8T / 2.0 TFSI ARP high strength flywheel bolt kit High quality ARP flywheel bolt kit for Audi/Seat/Skoda/VW 16V / 1.8T / 2.0 TFSI Recommended for performance upgraded engines Note: The ARP flywheel bolts fit only in conjunction with single mass flywheels, not suitable for dual mass flywheels! ARP Pro Series flywheel bolts are made from a heat treated, high strength moly forged steel. The reinforced bolts are highly recommended for performance engines, as OEM bolts may loosen with increased power and/or RPM. ARP bolts can also be reused after they have already been installed. Installation instructions: Clean the screw head contact surfaces on the flywheel, these must be free of oil and grease! Lubricate the thread with "medium strength" threadlocker. Carefully lubricate the lower part of the screw head with the supplied assembly paste, making sure that nothing gets on the thread! Tighten crosswise in 2 steps: First hand-tight, then 95Nm Technical data: Thread: M10x1mm Thread length: 18,5mm Socket head height: 5,3mm Shaft length: 21mm Shaft diameter: 10,0mm Tensile strength of approx. 1310 N/mm² Suitable for: Audi/Seat/Skoda/VW 16V / 1.8T / 2.0 TFSI Delivery content: 6 ARP Bolt for flywheel 1x ARP Ultra-Torque assembly grease